北海道大学 大学院情報科学院 システム情報科学コース
ディジタル幾何処理工学研究室
Digital Geometry Processing Lab.

Home | Access | Catalog | Link | Contact

2023年度 | 2022年度 | 2021年度 | 2020年度 | 2019年度 | 2018年度 |
2017年度 | 2016年度 | 2015年度 | 2014年度 |
2013年度 | 2012年度 | 2011年度 | 2010年度

2012年度 イベント Events



卒業・修了式(Graduation ceremony) (Mar. 25th, 2013)

本研究室に在籍した修士2年生3名,学部4年生5名に学位記が授与されました.夜はススキノで送別会でした.

Three master course 2nd degree students and five undergraduates completed their degrees.

ceremony

受賞(Award) (Mar 14th, 2013)

博士課程2年 川島千明君が本年度中に精密工学会誌に投稿した論文が「精密工学会論文賞」を受賞しました.受賞した論文は下記の通りです.プラントのレーザ計測点群から配管系統(直進パイプやエルボ等)を自動で抽出するアルゴリズムを提案しています.

川島千明,金井理,伊達宏昭: "大規模環境レーザ計測点群からの配管系統の自動認識",精密工学会誌, Vol.78, No.8, 722-729 (2012)


Mr. Kazuaki Kawashima (DC2), Prof. Kanai and Assoc. Prof. Date were awarded "2012 JSPE Paper Award" from Japan Society for Precision Engineering for their research paper titled "Automatic Recognition of Piping System from Large-scale Terrestrial Laser Scanned point Cloud".

new member
撮影:日大溝口先生
精密工学会春季大会(JSPE Meeting) (Mar.13-15, 2013)

2013年3月13-15日に東京工業大学で開催された精密工学会春季大会学術講演会に,DC2から2名,MC2から3名,MC1から5名,B4から1名の計11名が参加し,研究発表を行いました.

Eight master course students, two doctor course students and one undergraduate student made presentations of their researches at 2013 JSPE spring meeting held at Tokyo Institute of Technology.

受賞(Award) (Mar 6th, 2013))

修士課程1年 丸山翼君が,下記の賞を受賞しました.

授与団体: 社団法人日本写真測量学会北海道支部
受賞名: 平成24年度学術講演会論文賞
受賞講演名: 計測点群内における人間行動シミュレーションに基づく大規模実環境のアクセシビリティ評価の実現
受賞年月日: 2013年 3月6日

Mr. Tsubasa Maruyama (MC1) was awarded a "Best Paper Award" from Japan Society for Photogrammetry and Remote Sensing Hokkaido Branch for his research titled "Accessibility assessment of large scale environments based on human behavior simulation in the scanned point clouds" in Mar 6th, 2013. Congratulations!

Award
写真測量学会 北海道支部(JSPRS Hokkaido) (Mar 6th, 2013)

修士1年生丸山君が,第31回 写真測量学会北海道支部 学術講演会にて研究発表を行いました.

Mr. Maruyama, MC1 student, made a presentation of his research at the 31th meeting of JSPRS Hokkaido brunch held at kaderu27.

修士論文発表会(Master Thesis) (Feb 13th, 2013)

修士2年生3名が,修士論文発表を行いました.

・東 翔也「局所メッシュ細分化とメッシュ適合に基づくボイドを含む製品の解析用四面体メッシュ生成」
・前野 峻「適応的描画プリミティブ選択とLODによる大規模環境レーザ計測点群の効果的表示手法の開発」
・横山博貴「形状特徴とコンテクスト特徴を利用した市街地レーザ計測点群からの柱状物体認識と分類」


Three master course 2nd-degree students made presentations of their master thesis.

・Shoya Azuma,Tetrahedral Mesh Generation for Finite Element Analysis for Product with Voids based on Local Mesh Subdivision and Mesh Adaptation
・Takashi Maeno,Effective Rendering of Point Clouds of Large Scale Environments by Adaptive Selection of Rendering Primitives and LOD
・Hiroki Yokoyama,Detection and Classification of Pole-like Objects from Mobile Laser Scanning Data of Urban Environments using Shape Features and Context Features

卒業論文発表会(Undergraduate Thesis) (Feb 12nd, 2013)

学部4年生4名が,下記の卒業論文発表を行いました.

・天野克洋「デジタルハンドにおける骨リンクモデルの頑健で効率的な生成手法」
・高井俊吾「走行軌跡を用いたMMS計測点群の高精度レジストレーション」
・新田一馬「3D形状マッチングを用いたレーザ計測点群からの市街地環境メッシュモデリングに関する研究」
・畠山 龍「レーザースキャン環境モデル内でのデプスカメラによるモンテカルロ自己位置推定」

Four undergraduate students made presentations of their undergraduate thesis.

特別講演(Special Lecture) (Dec. 10th, 2012)

Chosun UniversityのPark Hyungjun 教授による技術講演会 (講演題目:Tangible augmented prototyping of digital appliances using simple objects) を開催しました.Park先生たちが開発中のARを利用した情報機器のプロトタイピング技術の実現方法を学びました.

The special lecture by Prof. Park Hyungjun from Chosun University (Title: Tangible augmented prototyping of digital appliances using simple objects) was held. We learned new prototyping technology of information appliances using AR.

Lecture
受賞(Award) (Dec. 6-7th, 2012)

日本大学の溝口先生(当研究室OB),道総研の田中氏と本研究室の共同研究成果の論文"Robust and Exhaustive Symmetry Detection from Scanned Meshes"が,ACDDE2012でBest Paper Awardを受賞しました.

Dr. Mizoguchi (Nihon University), Dr. Kanai, Dr. Date and Mr. Tanaka (Hokkaido Research Organization) won the ACDDE 2012 Best Paper Award for the paper titled "Robust and Exhaustive Symmetry Detection from Scanned Meshes".

Award
ACDDE(International Conference) (Dec. 6-7th, 2012)

金井教授,博士課程2年生の川島君と謝君,修士2年生の前野君,横山君,修士1年生の前濱君が,北海道のニセコで開催された国際学会ACDDE2012で研究発表を行いました.

Prof. Kanai, Mr. Kawashima, Mr. Xie ( Ph.D. Students), Mr. Maeno, Mr. Yokoyama, and Mr. Maehama (MC. Students) made presentations of their researches in Asian Conference on Design and Digital Engineering (2012ACDDE) held at Niseko, Hokkaido.

ACDDE
ViEW2012(Domestic Conference) (Dec. 6-7th, 2012)

博士課程1年生の丸山君と伊達准教授が,パシフィコ横浜で開催されたViEW2012で研究発表を行いました.特別講演の一つはハンマー投げの室伏選手によるものでした.

Mr. Maruyama (MC. Students) and Assc. Prof. Date introduced their research works in ViEW2012 held at Yokohama.

SPAR Europe(International Conference) (Nov. 12-14th, 2012)

金井教授と伊達准教授がオランダのDen Haagで開催されたSPAR Europe2012に参加し,大学用ブースにて研究室の点群処理研究の紹介と,情報収集を行ってきました.

Prof. Kanai and Assc. Prof. Date attended the SPAR Europe 2012 held at Den Haag, the Netherlands. Some researches about laser-scanned point cloud processings were introduced in the University Pavilion.

SPAR
ICPE(International Conference) (Nov. 8-9th, 2012)

博士課程2年生の川島君と謝君が淡路島で開催された国際学会ICPE2012で研究発表を行いました.

Mr. Kawashima and Mr. Xie, Ph.D. Students gave presentations of their researches in 14th International Conference on precision Engineering (ICPE2012) held at Awaji, Hyogo.

ICPE

新メンバー(New Students) (Oct. 25th, 2012)

4名のコース3年生が配属になりました.研究室の学生は全部で19名になりました.

Four 3rd grade undergraduate students joined our laboratory.

ARIDAで発表(ARIDA) (Sep. 25th, 2012)

研究室修士課程1年生の丸山君と伊達准教授がARIDA(動体計測研究会)で研究発表を行いました.

Mr. Maruyama (MC1) and Assoc. Prof. Date made presentations of their researches at ARIDA (Association for Real-time Imaging and Dynamic Analysis).

精密工学会秋季大会(JSPE Meeting) (Sep.14-16, 2012)

2012年9月14-16日に九州工業大学で開催された精密工学会秋季大会学術講演会に,DC2から2名,MC2から2名,MC1から2名の計6名が参加し,研究発表を行いました.

Four master course students and two doctor course students made presentations of their researches at 2012 JSPE fall meeting held at Kyushu Institute of Technology.

受賞 (Award) (Sep. 1, 2012)

本研究室 修士課程2年 東翔也君が,下記の賞を受賞しました.

授与団体: 精密工学会北海道支部
受賞名: 優秀プレゼンテーション賞
受賞講演名: X線CT計測データからのボイドを含む製品の四面体メッシュ生成
受賞年月日: 2012年 9月1日


Shoya Azuma (MC2) was awarded a "Best Presentation Prize" from Japan Society for Precision Engineering Hokkaido Branch for his research titled "Tetrahedral mesh generation of the product with voids from X-ray CT scan data" in Sep 1st, 2012. Congratulations!

award
(撮影: M1松山君)
精密工学会北海道支部会(JSPE Hokkaido Branch) (Sep. 1, 2012)

室蘭工業大学で開催された精密工学会北海道支部学術講演会に,DC2から2名,MC2から3名,MC1から4名の計9名が研究発表を行いました.今年は4年生も参加し,ほぼ研究室全員での参加となりました.

Two doctor course students and seven master course students made presentations of their researches at 2012 Japan Society for Precision Engineering Hokkaido branch meeting held at Muroran Institute of Technology. Four undergraduates also attended the conference.

送別会(Farewell Party) (Aug. 24, 2012)

韓国海洋大学からの4名の留学生の送別会をサッポロビール園で行いました.

Farewell party for 4 international students from Korea Marine University was held at Sapporo Beer Garden.

新メンバー(New members) (Aug. 20, 2012)

旭川高専からインターンシップ生がやってきました.約1カ月の間,リバースエンジニアリングの研究を行います.

Mr. Urata from Asahikawa National College of Technology joined our laboratory as an internship student. He studies about reverse engineering.

新メンバー(New members) (July. 6, 2012)

韓国海洋大学からJeong君が留学生としてやってきました.8月下旬までの1か月半の滞在です.

Mr. Jeong, an international student from Korea Marine University joined our laboratory. Duration of his stay is about a month and a half.

ジンパ(BBQ Party) (May. 11, 2012)

工学部中庭にて,毎年恒例のジンパ(ジンギスカンパーティ)を開催しました.小雨で寒かったですが熱い話でもりあがりました.

Lab's Jinpa (BBQ Party) was held at courtyard of engineering faculty. Members enjoyed the party in spite of the light rain and chilly weather.

新メンバー(New members) (Apr. 3rd, 2012)

関君,前濱君,松山君,丸山君(旭川高専出身),山岡君の5名が新修士1年生として研究室に配属となりました.また,フランスからLoic Mauries君が特別聴講学生として来日しました.

Five master course students and one international student from France joined our laboratory.